The pressure seal valves are designed in accordance with BS1868 and ASME B16.34 for service of high temperature and high pressure and are widely used in fossil fuel power plant. Compared with

We currently can produce cryogenic globe valves for working temperature down to -196℃ which are widely used in LNG、LPG、air separation and other low temperature industry. Wuzhou in-house computer controlled test facility can certify valves up to24”.

The pressure seal valves are designed in accordance with BS1873 and ASME B16.34 for service of high temperature and high pressure and are widely used in fossil fuel power plant. Compared with bolted bonnet joint valves,

The inlet and outlet passageways of the angle type dumping valve are not in the same direction, forming a right angle

It refers to a slurry valve with its stem and passageway forming a certain angle, and its seat sealing face and inlet and outlet passageways forming a certain angle.

It refers to the Y-type flat bottom dumping valve with its stem and passageway forming a certain angle, and its seat sealing face and inlet and outlet passageways forming a certain angle. The dumping entry has been designed as flat bottom type or pipe connecting type.

The inlet and outlet passageways of the angle pattern control valve are not in the same direction but forming a 90° angle. This kind of control valve can allow the medium flowing through the valve to change its flowing direction. It refers to the valve realizing adjustment of medium flow and pressure by changing the flowing area.

Being equipped with three opening ways and two seats, it is mainly used to change the medium flowing direction and distribute the medium.